|
|
| Strong
Beams |
|
 |
 |
WOODLAND
helps you profit by using high quality wood beams.
An adventure bed with two sleeping
levels consists of 50 metres of beam material e.g. the MONTEREY
model. The longest pieces of wood are up to 220cm long and
it is therefore easy to understand that the stability of an
adventure bed is dependent on the strength of the beams and the
resulting size of the contact surfaces connecting them.
In the case of the
MONTEREY-adventure bed this alone consists of over 160 contact
surfaces, which are connected to one another with the flathead
metal screws which leads to greater stability.
|
 Extensive
tests (normally done in comparison to competing
products) have shown, that transfering pressure through rotary,
twisting and bending motions can have an effect on the strength of
an adventure bed, especially the connecting surfaces. The designer
of WOODLANDs adventure beds decided that they should have robust
thick beams which no other adventure bed manufacturer offers: 58
x 58 Millimetre!.
|
| Low
knot content pinewood prevents weaknesses and creates stability in
the wood |
| A further
stability factor: Low knot content pinewood is
not just better looking but provides better stabilty especially
against turning pressure. e.g. for climbing ropes and hammock
seats, which experience shows can cause the knot area to crack.
|
| Maximum
quality for your money |
| Athough the
production at WOODLAND of low knot content wood measuring 58mm x
58mm is much more expensive; the first class wood materials and
58mm beam thickness have fully paid for themselves a thousand
times over with our customers receiving the benefits. The clever
customer does not have to look for the cheapest adventure bed, but
can look for the adventure bed with the lowest price cost
relationship: customer enquiries have shown that a high percentage
of our customers say next to the workmanship quality and the
material strength, the wood used in our products played an
important role as well.
|
 Conclusion:
Don't decide on a manufacturer, who
allows their furniture to suffer the negative consequences of
low quality of the wood and poor workmanship.
Return
|
|
|
|
Contact
